Table of Contents
Advertisement
Power Steering Gearbox
Installation (cont'dl
11. Install the steering joint cover with the clamps and
clips.
l n s t a l l t h e r e a r b e a m b r a c e r o d a n d r e t u r n l i n e
clamp on the rear beam.
N O T E : l n s t a l l t h e r e a r b e a m b r a c e t o w a r d t h e
return line clamp.
1 2 .
CLIP
38 N.m 13.9 kgl'm,28 lbf tl)
17-60
13. Install the three way catalytic converter with the
new gaskets and new self-locking nuts, and connect
the secondary heated oxygen sensor (HO2S) con-
nector.
SECONOARY
HEATED OXYGEN SENSOR CONNECTOR
22 N.m {2.2 kgf.m, 16lbIft)
Connect the shift linkage (M/T model: see section
13, A,,/T model; see section 14).
Thread the right and left tie-rod ends onto the rack
an equal number of turns.
1 4 .
Advertisement
Table of Contents
Troubleshooting
