Acura Integra 1998 Service Manual page 983

Emblem
Installation (cont'dl
Type R Mod€l:
Align the rear emblem application tape with the reaf turn signal light and the gap between the taillight and body, as
shown, then press the emblem into place. Remove the application tape.
Align the side emblem application tape with the body line and the wheelwell opening, as shown, then press the emblem
into place, Remove the application tape.
NOTE:
. Before applying. clean the body surface with a sponge dampened in alcohol.
. After cleaning, keep oil, grease and water from getting on the surface.
. When applying, make sure there are no wrinkles in the rear emblem.
Attachment Point:
i
l
TYPE R
REAR EMBLEM
Align with the rear turn
sagnal light.
TYPE R
SIDE EMBLEM
TYPE R
BOOY UNE
20-168
TAILLIGHT