Acura Integra 1998 Service Manual page 429

Description
Power Flow (cont'd)
@ Position
E Position is provided to drive only 2nd gear.
'1. Hydraulic pressure is applied to the 2nd clutch on the mainsha{t and power is transmitted via the 2nd clutch to the
mainshaft 2nd gear.
2.
power transmifted to the mainshaft 2nd gear is convey€d via the countetshaft 2nd gear, which drives the countershaft.
3.
Power is transmitted to the tinal drive gear, which drives the final driven gear.
NOTE:
Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of the 2nd gear exceeds that of
'lst gear, power from 1st gear is cut off at the one-way clutch
TOROUE CONVERTER
2ND CLUTCH
MAINSHAFT
FINAL DRIVE GEAR
14-12
FINAL DRIVEN GEAR
.a
t
{