Table of Contents
Advertisement
Differential (Automatic Transmissionl
Oil Seal Removal
Remove the differential assembly.
Remove the oil sealfrom the transmission housing.
Remove the oil seal from the torque converter
h o u s i n g .
Oil Seal Installation/Side Clearance-
1 . Install a 2.50 mm {O.O98 in} thrust shim in the trans-
mission housing.
NOTE: Do not install the oil seal yet.
TRANSMISSION
HOUStf{G
Install the differential assembly into the torque con-
verter housing using the special tool as shown.
DRIVER, 40 mm l.D.
07746-0030100
DIFFERENTIAL
ASSEMBLY
/--1
TOROUE CONVERTER
HOUSING
Assemble the transmission lsee section 141.
Installthe transmission housing and tighten the bolts
(see section 14).
TOROUE CONVERTER
HOUSING
15-32
OIL SEAL
Replace.
Advertisement
Table of Contents
Troubleshooting
