Acura Integra 1998 Service Manual page 910

Rear pillar trim panel/Rsar shelf trim panel/Real shelt
removal:
1. Remove both seat-back side bolsters {see page 20-
1 1 3 ) .
2.
Remove the upper portion of the rear door sill mold-
i n g , t h e n p u l l t h e r e a r d o o r t r i m a w a y o n e a c h s i d e .
> : Clip locations, 2
REAR PILLAR TRIM PANEL
SII-I MOLDING
3.
Remove both rear pillar trim panels.
> | Clip locations, 12
NOTE: When installing, make sure
the rear window defogger wire
harness is routed properly.
1
I
,
4.
Remove the rear shell trim panel.
V: Clip locations, 2
5. Slip the rear seat belt through the slit in the rear shelf.
REAR SHELF
Remove the seat lock cover (see page 20 113) and
high mount brake light (see section 23).
20-95