Table of Contents
Advertisement
Power Antenna Motor Replacement
1 . Remove the quarter trim panel (Hatchbackl or trunk
side trim panel (Sedanl.
Disconnect the 3P connector and antenna lead from
the motor. then remove the antenna nut and motor
bracket nut.
2 .
ANTENNA NUT
2.3 N.m {0.23 kgf'm,
1.7 tbf.trt
3P CONNECTOR
DRAIN HOSE
3 .
Remove the motor and antenna as an assembly.
NOTE: Tighten the antenna nut, then tighten the
motor bracket nut.
Antenna
Mast
Replacement
Removal:
NOTE: The antenna mast alone can be replaced without
having to remove the power antenna motor.
1. Remove the antenna nut and spacer.
2. Carefully withdraw the antenna mast while extend-
ing it by turning the radio switch ON.
ANTENNA NUT
SPACER
ANTENNA MAST DRIVE
CABLE
\ . .
ANTENNA NUT WRENCH
07JAA-001000C
2.3 N.m
(0.23 kgf.m, 1.7 lbf.ftl
POWER ANTENNA
MOTOF UNIT
J
)
I
23-203
Advertisement
Table of Contents
Troubleshooting
