Acura Integra 1998 Service Manual page 362

CAUTION:
a Do not 3pill brakefluid on the vehicle; it may damege
th€ paid; if brake fluid do63 contact th€ paint. wa3h
it otf immediately with water.
a Plug the end of the clutch pipe and reservoir hose with
a shop towel to prevent brake fluid from coming out.
1. Remove the brake fluid trom the clutch master
cylinder reservoir with a syringe,
2.
Disconnect the clutch pipe and reservoir hose from
the clutch master cylinder.
Remove the clutch master cylinder.
NOTE: Do not spill braketluid ontheclutch master
cylinder damper.
CLUTCH PIPE
1 5 N . m { 1 . 5 k g f ' m ,
11 lbt.Ir)
5 .
cLulcH
MASTER
CYLINDER
Install the clutch master cylinder in the reverse or-
der of removal.
NOTE: Bleed the clutch hydraulic system {see page
I z - o l .
cturcH
MASTER
CYLINDER
Pry out the cotter pin, and pull the pedal pin out of
the yoke. Remove the nuts.
NUTS
1 3 N . m { 1 . 3 k g t . m ,
9 rbf.ftl
PEOAL PIN
-6rl
(P/N 08798-90021
Clutch Master Cylinder
Removal/lnstallation
2-5