D-Link DXS-3600 Series Reference Manual page 1192

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
+ | -
HOURS-OFFSET
MINUTES-OFFSET
Default
By default, this option is set to UTC.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The time obtained by the SNTP server refers to the UTC time. The local time will be calculated based on
UTC time, time zone, and the daylight saving configuration.
Example
This example shows how to set the time zone to the Pacific Standard Time (PST), which is 8 hours ahead
of UTC.
Switch# configure terminal
Switch(config)# clock timezone - 8
Switch(config)#
105-4 show clock
This command is used to display the time and date information.
show clock
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command also indicates the clock's source. The clock source can be "No Time Source" or "SNTP".
Example
This example shows how to display the current time.
+: Specifies that time to be added to the UTC
-: Specifies that time to be subtracted from the UTC
Specifies the hours difference from UTC
(Optional) Specifies the minutes difference from UTC.
1192