Ip Slb Probe Port - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip slb probe port

Configures the TCP/UDP port on which the Server Load Balancing (SLB) probe is sent.
ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp}
port port_number
Syntax Definitions
probe_name
ftp
http
https
imap
imaps
nntp
ping
pop
pops
smtp
tcp
udp
port_number
Defaults
parameter
port_number
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip slb probe mis_server udp port 200
page 26-22
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies an FTP probe.
Specifies an HTTP probe.
Specifies an HTTPS probe.
Specifies an IMAP probe.
Specifies an IMAPS probe.
Specifies an NNTP probe.
Specifies a ping probe.
Specifies a POP probe.
Specifies a POPS probe.
Specifies an SMTP probe.
Specifies a TCP probe.
Specifies a UDP probe.
Specifies the TDP/UDP port number (0–65535).
default
0
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012