Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 116

JUNOS 10.1 Network Interfaces Configuration Guide
Table 3: Encapsulation Support by Interface Type (continued)
Interface Type
—Loopback interface;
lo
the JUNOS Software
automatically configures
one loopback interface
( )
lo0
ls —Link services interface
lsq —Link services IQ
interface
lt —Logical tunnel interface
ml —Multilink interface
(including Multilink Frame
Relay and MLPPP)
46
Interface Encapsulations Overview
Physical Interface Encapsulation
NA
multilink-frame-relay-uni-nni —Multilink Frame
Relay UNI NNI (FRF.16) encapsulation
multilink-frame-relay-uni-nni —Multilink Frame
Relay UNI NNI (FRF.16) encapsulation
NA
NA
Logical Interface Encapsulation
NA
multilink-frame-relay-end-to-end —Multilink Frame
Relay end-to-end (FRF.15)
—Multilink PPP
multilink-ppp
multilink-frame-relay-end-to-end —Multilink Frame
Relay end-to-end (FRF.15)
—Multilink PPP
multilink-ppp
ethernet —Ethernet service
ethernet-vpls —Ethernet virtual private LAN
service
—Ethernet cross-connect
ethernet-ccc
—Frame Relay encapsulation
frame-relay
—Frame Relay for a
frame-relay-ccc
cross-connect
—VLAN service
vlan
—802.1Q tagging for a cross-connect
vlan-ccc
—VLAN virtual private LAN service
vlan-vpls
multilink-frame-relay-end-to-end —Multilink Frame
Relay end-to-end (FRF.15)
—Multilink PPP
multilink-ppp