Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 111

Table 3: Encapsulation Support by Interface Type (continued)
Interface Type
—ATM2 intelligent
at
queuing (IQ) interface
—Gigabit Ethernet
bcm
internal interfaces
br —Integrated Services
Digital Network (ISDN)
interface
—Container interface
ci
Physical Interface Encapsulation
—ATM cell relay encapsulation
atm-ccc-cell-relay
for a cross-connect
atm-pvc —ATM permanent virtual circuits
ethernet-over-atm —Ethernet over ATM
encapsulation
NA
NA
—Cisco-compatible HDLC framing
cisco-hdlc
—Serial PPP device
ppp
Chapter 2: Understanding Router Interfaces
Logical Interface Encapsulation
—ATM cell relay for CCC
atm-ccc-cell-relay
—ATM VC for CCC
atm-ccc-vc-mux
—Cisco-compatible ATM NLPID
atm-cisco-nlpid
encapsulation
atm-mlppp-llc —ATM MLPPP over AAL5/LLC
atm-nlpid —ATM NLPID encapsulation
—ATM PPP over AAL5/LLC
atm-ppp-llc
—ATM PPP over raw AAL5
atm-ppp-vc-mux
—ATM LLC/SNAP encapsulation
atm-snap
—ATM LLC/SNAP for a translational
atm-tcc-snap
cross-connect
atm-tcc-vc-mux —ATM VC for a translational
cross-connect
—ATM VC multiplexing
atm-vc-mux
ether-over-atm-llc —Ethernet over ATM
(LLC/SNAP) encapsulation
—Ethernet VPLS over ATM
ether-vpls-over-atm-llc
(bridging) encapsulation
NA
NA
—SONET interface required for APS
aps
configuration.
Interface Encapsulations Overview
41