Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 113

Table 3: Encapsulation Support by Interface Type (continued)
Interface Type
—E1 interface (including
e1
channelized STM1-to-E1
interfaces)
Physical Interface Encapsulation
—Cisco-compatible HDLC framing
cisco-hdlc
—Cisco-compatible HDLC framing
cisco-hdlc-ccc
for a cross-connect
cisco-hdlc-tcc —Cisco-compatible HDLC framing
for a translational cross-connect
—Any Frame Relay DLCI
extended-frame-relay-ccc
for a cross-connect
extended-frame-relay-tcc —Any Frame Relay DLCI
for a translational cross-connect
flexible-frame-relay —Multiple Frame Relay
encapsulations
—Frame Relay encapsulation
frame-relay
—Frame Relay for a
frame-relay-ccc
cross-connect
frame-relay-port-ccc —Frame Relay port
encapsulation for a cross-connect
—Frame Relay for a translational
frame-relay-tcc
cross-connect
—Multilink Frame
multilink-frame-relay-uni-nni
Relay UNI NNI (FRF.16) encapsulation
ppp —Serial PPP device
ppp-ccc —Serial PPP device for a cross-connect
ppp-tcc —Serial PPP device for a translational
cross-connect
Chapter 2: Understanding Router Interfaces
Logical Interface Encapsulation
—Frame Relay DLCI for CCC
frame-relay-ccc
—PPP over Frame Relay
frame-relay-ppp
—Frame Relay DLCI for a
frame-relay-tcc
translational cross-connect
Interface Encapsulations Overview
43