Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 117

Network interfaces configuration
Table of Contents

Advertisement

Table 3: Encapsulation Support by Interface Type (continued)
Interface Type
—Serial interface
se
(including EIA-530, V.35,
and X.21 interfaces)
Physical Interface Encapsulation
—Cisco-compatible HDLC framing
cisco-hdlc
—Cisco-compatible HDLC framing
cisco-hdlc-ccc
for a cross-connect
cisco-hdlc-tcc
—Cisco-compatible HDLC framing
for a translational cross-connect
—Frame Relay encapsulation
frame-relay
—Frame Relay for a
frame-relay-ccc
cross-connect
—Frame Relay port
frame-relay-port-ccc
encapsulation for a cross-connect
frame-relay-tcc
—Frame Relay for a translational
cross-connect
—Serial PPP device
ppp
—Serial PPP device for a cross-connect
ppp-ccc
—Serial PPP device for a translational
ppp-tcc
cross-connect
Chapter 2: Understanding Router Interfaces
Logical Interface Encapsulation
—Frame Relay DLCI for CCC
frame-relay-ccc
—PPP over Frame Relay
frame-relay-ppp
—Frame Relay DLCI for a
frame-relay-tcc
translational cross-connect
Interface Encapsulations Overview
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos 10.1

Table of Contents