Bpdu-Block-On-Edge; Example: Configuring Bpdu Protection On Stp Interfaces To Prevent Stp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

bpdu-block-on-edge

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
bpdu-block-on-edge;
[edit protocols mstp],
[edit protocols rstp],
[edit protocols vstp]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
Configure bridge protocol data unit (BPDU) protection on all edge ports of a switch.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1644
show spanning-tree interface on page 1653
clear ethernet-switching bpdu-error on page 1636
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1527

Example: Configuring BPDU Protection on STP Interfaces to Prevent STP

Miscalculations on EX Series Switches on page 1561
Understanding VSTP for EX Series Switches on page 1525
Chapter 68: Configuration Statements for Spanning-Tree Protocols
1601