ABB IRB 2600ID Product Manual page 420

5 Calibration
5.4.3 Installation locations for the calibration tools
Continued
IRB 2600ID
xx1600000523
Spare parts
When calibration is not being performed, a protective cover and an o-ring should
always be installed on the fixed calibration pin as well as a protective plug, included
a sealing, in the bushing. Replace damaged parts with new.
Spare part
Protection cover and plug set
Protective plug on turning disc
420
Article number
3HAC059487-001
3HAC057676-001
(IRB 2600ID)
3HAC057511-001
(IRB 2600)
© Copyright 2009-2023 ABB. All rights reserved.
Note
Contains replacement calibration
pin covers and protective plugs
for the bushing.
Replace if damaged or missing.
Product manual - IRB 2600
3HAC035504-001 Revision: AD