ABB IRB 2600ID Product Manual page 233

2
3
Product manual - IRB 2600
3HAC035504-001 Revision: AD
4.3.3 Replacing the cable harness in the upper arm - IRB 2600ID
Action
Place the cable harness spiral into its pos-
ition in the arm house.
Lubricate the cables in the spiral with
grease.
Note
Do not cut the strap used as transport
protection of the cable harness spiral at
this point!
Apply flange sealant on the surface where
the cover shall be fitted. See figure!
© Copyright 2009-2023 ABB. All rights reserved.
Information
Grease: Shell Gadus S2, 3HAC042536-001.
xx1000001005
Parts:
A Cable harness spiral
B Attachment screws (8 pcs) M8x25
quality Steel 12.9 Gleitmo
xx1000001006
Part:
A Flange sealant: Loctite 574, -
Continues on next page
4 Repair
Continued
233