Safety; Safety Information; Limitation Of Liability - ABB IRB 2600ID Product Manual

1 Safety

1.1 Safety information

1.1.1 Limitation of liability

Limitation of liability
Any information given in this manual regarding safety must not be construed as a
warranty by ABB that the industrial robot will not cause injury or damage even if
all safety instructions are complied with.
The information does not cover how to design, install and operate a robot system,
nor does it cover all peripheral equipment that can influence the safety of the robot
system.
In particular, liability cannot be accepted if injury or damage has been caused for
any of the following reasons:
Spare parts and equipment
ABB supplies original spare parts and equipment which have been tested and
approved for their intended use. The installation and/or use of non-original spare
parts and equipment can negatively affect the safety, function, performance, and
structural properties of the robot. ABB is not liable for damages caused by the use
of non-original spare parts and equipment.
Product manual - IRB 2600
3HAC035504-001 Revision: AD
• Use of the robot in other ways than intended.
• Incorrect operation or maintenance.
• Operation of the robot when the safety devices are defective, not in their
intended location or in any other way not working.
• When instructions for operation and maintenance are not followed as
intended.
• Non-authorized design modifications of the robot.
• Repairs on the robot and its spare parts carried out by in-experienced or
non-qualified personnel.
• Foreign objects.
• Force majeure.
© Copyright 2009-2023 ABB. All rights reserved.
1 Safety
1.1.1 Limitation of liability
21