ABB IRB 2600ID Product Manual page 160

3 Maintenance
3.4.2 Changing the oil, axis 1 gearbox on floor mounted robots
Continued
7
8
9
10
160
Action
Refill the gearbox with lubrication oil.
Valid for IRB 2600-20/1.65 type C, IRB 2600-
12/1.65 type C:
Use the oil dispenser.
Note
The amount of oil to be filled depends on the
amount previously being drained.
Inspect the oil level.
Valid for IRB 2600-20/1.65 type C, IRB 2600-
12/1.65 type C:
Remove the oil dispenser and refit the protect-
ive cap to the nipple.
Refit the oil plug.
© Copyright 2009-2023 ABB. All rights reserved.
Note
Where to find type of oil and total
amount is detailed in Type and
amount of oil in gearboxes on
page 151.
How to inspect the oil level is de-
scribed in section:
• Inspecting oil level, axis-1
gearbox on page 121
xx1800001136
Tightening torque: 24 Nm
Different position due to design differ-
ences:
xx1800001137
xx1800001139
Product manual - IRB 2600
3HAC035504-001 Revision: AD