Standard Tools - ABB IRB 2600ID Product Manual

8 Reference information

8.6 Standard tools

8.6 Standard tools
General
All service (repairs, maintenance, and installation) procedures contains lists of
tools required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the standard toolkit and defined in
the following table.
This way, the tools required are the sum of the standard toolkit and any tools listed
in the instruction.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
1
1
1
1
452
Tool
Ring-open-end spanner 8-19 mm
Socket head cap 2.5-17 mm
Torx socket no: 20-60
Small screwdriver
Plastic mallet
Ratchet head for torque wrench 1/2"
Socket head cap no: 5, socket 1/2" bit L 20 mm
Socket head cap no: 6, socket 1/2" bit L 20 mm
Socket head cap no: 8, socket 1/2" bit L 20 mm
Small cutting plier
T-handle with ball head
© Copyright 2009-2023 ABB. All rights reserved.
Product manual - IRB 2600
3HAC035504-001 Revision: AD