ABB IRB 2600ID Product Manual page 98

2 Installation and commissioning
2.5.2 Installing an expansion container
Continued
7
8
9
10
11
Continues on next page
98
Action
Apply locking liquid to the three screw holes
in the expansion container.
Knock in the VK-cover with a rubber mallet.
Secure with three screws and washers.
Remove the plastic plug.
Apply some grease on the small o-ring and
place it in the recess on the expansion con-
tainer.
Place the expansion container in the base
and place it so the drain holes match.
Tip
Turn and install the container quickly to avoid
oil spill.
Secure the expansion container with the at-
tachment screws and washers.
Wipe off any oil residuals before continuing.
© Copyright 2009-2023 ABB. All rights reserved.
Information
Locking liquid: - (Loctite 2400 (or equival-
ent Loctite 243)).
Screws: M6x8 (3 pcs).
xx1500001957
xx1500001956
xx1500001959
Tightening torque 6 Nm.
Product manual - IRB 2600
3HAC035504-001 Revision: AD