ABB IRB 2600ID Product Manual page 247

4
5
6
7
8
Refitting the brake release board
Use this procedure to refit the brake release board.
1
Product manual - IRB 2600
3HAC035504-001 Revision: AD
Action
Remove the base cover.
CAUTION
Clean cover from metal residues before
opening.
Metal residues can cause shortage on the
boards which can result in hazardous fail-
ures.
Take a picture or make notes of how the
robot cabling is positioned in regard to the
brake release board.
Disconnect connectors X8, X9 and X10 from
the brake release board.
Remove the nuts securing the brake release
board.
Remove the brake release board.
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
© Copyright 2009-2023 ABB. All rights reserved.
4.3.5 Replacing the brake release board
Note
xx0800000456
Parts:
A Base
B Base cover
C Attachment screws M6x16 quality
8.8-A2F (6 pcs)
X8
X9
xx1700000978
Note
Continues on next page
4 Repair
Continued
A
B
C
X10
247