Expected Component Life - ABB IRB 2600ID Product Manual

3 Maintenance

3.2.3 Expected component life

3.2.3 Expected component life
General
The expected life of a specific component of the robot can vary greatly depending
on how hard it is run.
Expected component life - protection type Standard
Component
Cable harness
Normal usage
Cable harness
Extreme usage
Gearboxes
i
ii
iii Examples of "extreme usage" in regard to movement: press tending, very severe palletizing
iv Depending on application, the lifetime can vary. The Service Information System (SIS), integrated
120
i
iii
iv
Examples of "normal usage" in regard to movement: most material handling applications.
Severe chemical or thermal environments, or similar environments, can result in shortened life
expectancy.
applications, major use of axis 1 movement.
in the robot software, can be used as a guidance for planning service of gearbox for the individual
robot. This applies to gearboxes on axes 1, 2 and 3. The lifetime of gearbox axes 4, 5 and 6 is not
calculated by SIS (See the Operating manual - Service Infomation System) In applications such as
Foundry or Washing the robot can be exposed to chemicals, high temperature or humidity which
can have an effect on the lifetime of gearboxes. Contact the local ABB Robotics Service team for
more information.
The SIS for an IRC5 system is described in the Operating manual - Service Information System.
© Copyright 2009-2023 ABB. All rights reserved.
Expected life
ii
40,000 hours
ii
20,000 hours
40,000 hours
Note
Not including:
• Possible SpotPack
harnesses
• Optional upper arm
harnesses
Not including:
• Possible SpotPack
harnesses
• Optional upper arm
harnesses
Product manual - IRB 2600
3HAC035504-001 Revision: AD