4.3.3 Cleaning the FlexPendant
Location
The surfaces to clean are shown in the illustration below.
xx1800000128
A
B
Required equipment
Equipment, etc.
Soft cloth
Water/Mild cleaning agent
Clean the touch screen
This section describes how to clean the touch screen.
1
2
3
4
Cleaning considerations
The section below specifies some special considerations when cleaning the
FlexPendant:
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
Touch screen
Hard buttons
Action
Lock the screen.
It is safe to clean the FlexPendant
when the Lock screen appears.
Clean the touch screen and hard-
ware buttons using a soft cloth and
water or a mild cleaning agent.
Unlock the screen, by tapping the
buttons.
•
Use ESD Protection
•
Use cleaning equipment as specified above. Any other cleaning equipment
may shorten the life time of the touch screen.
•
Check that all protective covers are fitted to the device before cleaning.
•
Make sure that no foreign objects or liquids can penetrate into the device.
© Copyright 2023-2023 ABB. All rights reserved.
4.3.3 Cleaning the FlexPendant
A
B
Note
ESD protected
Info/Illustration
4 Maintenance
Continues on next page
167