Advertisement
SAFETY PRECAUTIONS
Please observe the following general precautions during operation of this instrument.
Failure to comply with these precautions violates safety standards and the intended
use of the instrument. Thermo Fisher Scientific Microm International GmbH is not
liable for misuse of the instruments and failure to comply with basic safety
requirements.
INSTRUMENT GROUNDING
To avoid injury from electrical current, the instrument must be connected with the safety ground. The
instrument is equipped with a three wire ground plug. The power outlet must be connected to the
safety ground and must meet the International Electro technical Commission (IEC) regulations.
CAUTION: MAINS VOLTAGE
Never remove instrument covers during operation. Component replacements as well as adjustments
must only be made by trained service personnel. Unplug the unit before removing or opening the
covers. Only original spare parts must be used for replacement work.
DANGER IN EXPLOSIVE ENVIRONMENT
The instrument must not be operated in the presence of flammable gases.
HAZARD OF RADIOACTIVE RADIATION
When working with radioactive specimens observe all applicable radiation safety procedures. When
working with radioactive contaminated material, appropriate safety and disinfection measures must be
carried out. According to the rules and regulations concerning the handling of radioactive
contaminated material of the respective laboratory, safety clothing (e.g. particle mask, gloves,
protective shoe covers) must be worn.
Radioactive contaminated waste must be disposed of according to the respective regulations.
6
Thermo Scientific Section Transfer System Microm STS
A T T E N T I O N !
Microm International GmbH
Part of Thermo Fisher Scientific
Im Steingrund 4 - 6
63303 Dreieich / Germany
387 712 - English
Advertisement
