Any mistakes can be corrected using the soft-key 'Delete' which will delete the last character typed.
Alternatively, the sequence can be re-typed before the 'Enter' key is pressed and the existing numbers
will be pushed off the screen.
Changing Between Parameters
By default, the instrument displays the 'Main Read Screen' (for gas measurement). This shows the CO
reading. The instrument will return to this screen after power on or when returning from the menus.
Continue to press the 'Scroll' key to return to the 'Main Read Screen'.
Memory
The memory should not be used as a permanent storage medium and any important data should be
transferred to a more permanent storage medium as soon as possible. The instrument should not be
stored for prolonged periods with valuable data in its memory.
Storage
When not in use the instrument should be kept in a clean, dry and warm environment, such as an
office. It should be stored flat with the stand folded away.
Main Menu
The 'Main Menu' enables the operator to select options to set up specific parameters and perform
operational tasks prior to sample readings being taken or to view data/information stored in the
instrument.
1. Press the 'Menu' key on the front of the instrument panel and the following screen is displayed:
2. Press the soft-key 'Exit' to exit the 'Main' menu.
Thermo Scientific
Note The instrument will not allow invalid data to be entered; this should be deleted and
re-entered.
Main Menu
General Operational Instructions
Changing Between Parameters
G100 Range CO
Analyser
2
2
5-3