Chapter 7; Data Transfer And Software Updates; Data Storage And Transfer Settings; Measurement Read Type Setting - Thermo Scientific Orion Star A220 Series User Manual

7

Data Transfer and Software Updates

C H A P T E R 7

Data Storage and Transfer Settings

Meter settings that affect data storage and transfer include the measurement read type, export
data settings and data log setting. The date and time settings should also be reviewed and
update as needed.

Measurement Read Type Setting

The selected read type determines when the meter sends measurements to the data log, if the
data log is enabled in the setup menu, and when the meter exports measurements to a printer
or computer, if a printer or computer is properly connected to the meter and export data settings
are enabled in the setup menu. Select from Auto-Read or continuous read types.
Auto-Read
Press the measure (esc) key to start a measurement. The AR icon blinks as the changing
value stabilizes. When the measurement is stable, the AR icon stops blinking and the
measurement is locked on the display until the measure (esc) key is pressed again. When the
data log and export data settings are enabled, the stable measurement is automatically saved
to the data log and exported to a printer or computer.
Continuous
Measurement values are continuously updated on the display and the Stabilizing or Ready
icon indicates the measurement stability status. When the data log and export data settings are
enabled, press the log/print key to save a measurement to the data log and export it to a
printer or computer.
54 Orion Star A220 Series Portable Meter User Manual Thermo Scientific
|