Table of Contents
Advertisement
Chapter 8 Data Storage and Review
Data Storage Settings
Measurement Read Type
The measurement read type determines when the meter sends measurements to outputs as selected in the setup menu
and when properly connected to the meter. These are set individually for each channel. Measurement Read Type is set
per channel in the setup menu. Please refer chapter 3 Setup Menus in this reference guide for more information.
Datalog, Computer and Printer Export Settings
Orion V
ersa
1. From measurement mode, press setup/3.
2. Press the arrow keys to highlight Inst. Settings. Press setup/3. Use the down arrow key to highlight
3. Press f2 (page) key, use the arrow keys and f3 (select) key to:
For more information on these settings, refer to the Orion V
turn on Data Log to enable data storage.
Datalog Review
This option allows for stored data to be:
• reviewed
• printed individually, in a group or all
• deleted
• analyzed with general statistical information
The datalog will reflect a screen capture of all the information at the time of datalogging.
To review datalog information
• Press log view (9) key
• Press f3 (select) key
• Follow prompts to review information
Thermo Scientific Orion V
s
Meters have a 2000-datalog capability. To make your selection:
tar
your desired communication output port:
a. USB
b. RS232
c. USB Printer – enables communication through the micro-USB port directly to a USB printer.
a. turn on printing
b. select the print format
c. turn on datalogging
s
pH with LogR Temperature Module
ersa
tar
s
Reference Guide, Chapter 3 Instrument Settings to
ersa
tar
17
Advertisement
Table of Contents
