Inter-Tel AXXESS Manual page 363

Hide thumbs Also See for AXXESS:

Table of Contents

While in this screen, you have the following options:

If you click Cancel while uploading files to IP devices, the Upload Utility generates a warn-

ing message. This message indicates that the IP address for the IP devices may return to

factory default, which is the same for all IP devices. In other words, all IP devices have the

SAME IP address. If this occurs, you must either reprogram the IP address for each device

or upload the file to each device one at a time.

After the device accepts the file, the device indicates this change of state.

lower two pins once the upload completes.

Uploading IP Devices

Close: Closes the screen.

Retry: Allows you to attempt the upload again for failed operations. To retry the

upload, highlight the IP address or hostname of the devices that did not get

upgraded and click

get upgraded, do not select any IP addresses or hostnames before clicking

Save Log: Saves the log information to a text file (.txt).

Cancel: Terminates the upload operation.

when the upload is complete.

The IPC or IPRC flashes the green Card On-Line LED and the yellow Circuit

Busy LED once per second while it erases and programs its flash memory.

The LCD on the IP PhonePlus displays ERASING FLASH, followed by PRO-

GRAMMING CODE, and followed by DOWNLOAD COMPLETE.

The IP SLA flashes the On-Line LED and the SL Status LED once per second

while it erases and programs its flash memory.

Do not forget to replace the boot-sector protection jumper on the IPC to the

MANUAL VERSION 11.0 – May 2008

. To attempt the upload again for all devices that did not

Installation

Chapters

Table of Contents