Dlp-B 172 Change An Optical Port To Sdh - Cisco ONS 15327 Procedure Manual
Hide thumbs
Also See for ONS 15327:
- User documentation (559 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
NTP-B89 Modify Line Settings and PM Parameter Thresholds for Optical Ports
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5
DLP-B172 Change an Optical Port to SDH
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Double-click the OC-N card where you want to provision a port for SDH.
Step 1
Before you can change the port type to SDH, ensure the following:
•
•
•
•
Step 2
Click the Provisioning > Line tabs.
Step 3
In the Type field, specify the port and choose SDH.
Click Apply.
Step 4
If the card is a multiport OC-N card, such as an OC-3, you can repeat Steps
Step 5
on the card.
Return to your originating procedure (NTP).
Step 6
Cisco ONS 15327 Procedure Guide, R4.0
10-14
Use this task to provision a port on an OC-N card for SDH.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Provisioning or higher
The EnableSyncMsg and SendDoNotUse fields are unchecked.
The card is not part of a BLSR or 1+1 protection group.
The card is not part of an orderwire channel.
The card is not a SONET DCC termination point.
Chapter 10
Change Port Settings
3
and
4
for any other ports
March 2003
Advertisement
Table of Contents
