Connecting The Fe Line Interface Ports; Cabling The Fe Line Port - Cisco SCE 2000 Platform SCE 2000 4/8xFE Installation And Configuration Manual

Chapter 6 Cabling the Line Ports and Completing the Installation
Connecting the line ports to the network
Figure 6-4: Cabling Diagram: Dual Link Inline Topology Two Cascaded SCE Platforms

Connecting the FE Line Interface Ports

The following sections present the general procedure for cabling the FE interface ports. Refer to
Cabling Diagrams (on page 6-2) to find the appropriate cabling diagram for the topology of your
system for the specific connections required.

Cabling the FE Line Port

Ports FE-3 and FE-4 currently have no software support.
Note
Cisco SCE 2000 4/8xFE Installation and Configuration Guide
6-6 OL-7826-05