Setting Up A Data Log In Rd500 - Siemens SITRANS RD500 Manual
Configuring sitrans rd500 for connection to multiranger with modbus rtu
Hide thumbs
Also See for SITRANS RD500:
- Operating instructions manual (48 pages) ,
- Application examples (9 pages) ,
- Application manual (6 pages)
Table of Contents
Advertisement
3.2
Setting Up a Data Log in RD500
1. Open a web browser and type http://192.168.2.100 into the browser address bar – use
Login: admin Password: rd500 when prompted. Note: If a browser is already open, close it
and restart to ensure it has the correct network settings.
2. The browser window will show the Overview page. Click on Configure and then Logs; you
should see the screen below.
3. Click on the check box to enable the first Log entry. Enter a Name (e.g. LevelLog), set the
desired Interval and then click Apply. (Another log entry will appear below the first one.)
Configuring SITRANS RD500 for connection to MultiRanger with MODBUS RTU
Application examples, 09/2020, AG111710
Planning/configuring
3.2 Setting Up a Data Log in RD500
7
Advertisement
Table of Contents
