Ip Ospf Authentication-Key - Siemens SCALANCE XM-400 Configuration Manual

9.3.14.3

ip ospf authentication-key

Description
With this command, you specify the password.
Note
This command is available only with layer 3.
Requirement
● The interface is a layer 3 interface.
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
ip ospf authentication-key <password (8)>
The parameter has the following meaning:
Parameter
Password
Result
The password is specified.
Further notes
You delete the password with the
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Description
Password
no ip ospf authentication-key
Range of values / note
Enter a password.
Maximum length: 8 characters
Layer 3 functions
9.3 OSPFv2
command.
401