Show Snmp Group; Show Snmp Group Access - Siemens SCALANCE XM-400 Configuration Manual
Simatic net industrial ethernet switches command line interface
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Syntax
Call the command without parameters:
show snmp filter
Result
The configured SNMP filters are displayed.
7.4.1.5
show snmp group
Description
This command shows the configured SNMP groups.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show snmp group
Result
The configured SNMP groups are displayed.
7.4.1.6
show snmp group access
Description
This command shows the rights of the configured SNMP groups.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
or
cli#
Network protocols
7.4 SNMP
269
Advertisement
Table of Contents
