Crypto Ca-Cert Install - Dell S6100 Configuration Manual

Usage Information
The following RBAC roles are allowed to issue this command:
•
•
Before deleting a CA certificate, the system checks whether that certificate is an issuer of other installed
certificate on the system. If so, the system informs you to delete other installed certificates first.
Related Commands crypto ca-cert installcrypto cert generatecrypto ca-cert install

crypto ca-cert install

Downloads and installs the certificate of a Certificate Authority (CA) on to the device.
Syntax crypto ca-cert install path
Parameters
path
Defaults NA.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command:
Version
9.11.0.0
Usage Information
The following RBAC roles are allowed to issue this command:
•
•
Upon successful installation, the system displays a notification on the device. If remote logging is configured, the
notification is also sent to the syslog server. Contents of the CA certificate's subject are displayed.
Related Commands
•
1732 X.509v3
sysadmin
secadmin
Enter the path where the CA certificate is available for download. The format that you
use to specify the location of the CA certificate also includes the protocol that is used to
contact the CA. You can use the following options that you can use to download and
install a certificate from the CA:
• tftp — tftp://ca–ip–address/tftp/CAcert.pem
• usbflash: — usbflash:/certs/CAcert.pem
• ftp — ftp://userid:password@ca–ip–address/certs/CAcert.pem
• scp — scp://userid:password@ca–ip–address/certs/CAcert.pem
• http — http://192.168.1.100/certs/CAcert.pem
• flash — flash://filepath/filename
Description
Introduced the command.
sysadmin
secadmin
crypto cert install