■2. When connecting the GOT and the personal computer by Ethernet
(1) Connecting the GOT and PLC in bus connection or direct CPU connection (when connecting to
QCPU (Q mode))
Step 1.
Click the Connection Destination view
the Navigation window of GX Works2.
Step 2.
The [Transfer Setup] is displayed.
Step 3.
Set the [Transfer Setup]:
PC side I/F :Ethernet Board
PLC side I/F :GOT
Other Station Setting : No specification
Step 4.
Double-click [Ethernet Board] of the PC side I/F to display [PC side I/F Ethernet Board Setting].
22 - 108
22.7 Personal Computer Side Setting
[Connection Destination]
[(Connection target data name)] in