PIM-SM C
OMMANDS
-
-
IP PIM CISCO
REGISTER
CHECKSUM GROUP
ip pim cisco-register-checksum group-list
Overview
Use this command to configure the option to calculate the Register checksum over
the whole packet on multicast groups specified by the access-list. This command
is used to inter-operate with older Cisco IOS versions.
Use the no variant of this command to revert to default settings.
Syntax
ip pim cisco-register-checksum group-list <acl>
no ip pim cisco-register-checksum group-list <acl>
Mode
Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
C613-50170-01 Rev B
-
LIST
Parameter
Description
<acl>
The standard, expanded or named ACL to use.
configure terminal
ip pim cisco-register-checksum group-list 34
access-list 34 permit 224.0.1.3
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1332