Show Route Protocol - Dell PowerConnect J-EX4200-24T Software Manual

show route protocol

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
show route protocol protocol
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route protocol protocol
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the route entries in the routing table that were learned from a particular protocol.
—Protocol from which the route was learned:
protocol
—Access route for use by DHCP application
access
—Access-internal route for use by DHCP application
access-internal
—Locally generated aggregate route
aggregate
—Asynchronous Transfer Mode virtual private network
atmvpn
bgp —Border Gateway Protocol
ccc —Circuit cross-connect
—Directly connected route
direct
—Distance Vector Multicast Routing Protocol
dvmrp
—End System-to-Intermediate System
esis
—Locally defined flow-specification route.
flow
isis —Intermediate System-to-Intermediate System
ldp —Label Distribution Protocol
—Layer 2 circuit
l2circuit
—Layer 2 virtual private network
l2vpn
—Local address
local
—Multiprotocol Label Switching
mpls
msdp —Multicast Source Discovery Protocol
ospf —Open Shortest Path First versions 2 and 3
—Open Shortest Path First versions 2 only
ospf2
—Open Shortest Path First version 3 only
ospf3
—Protocol Independent Multicast
pim
—Routing Information Protocol
rip
ripng —Routing Information Protocol next generation
Chapter 74: Operational Commands for Layer 3 Protocols
1987