Flow-Control - Dell PowerConnect J-EX4200-24T Software Manual

flow-control

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
force-up
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
(flow-control | no-flow-control);
[edit interfaces interface-name ether-options]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Explicitly enable flow control, which regulates the flow of packets from the switch to the
remote side of the connection, or disable it.
—Enable flow control; flow control is useful when the remote device is a
flow-control
Gigabit Ethernet switch.
—Disable flow control.
no-flow-control
Flow control enabled.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 919
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 909
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
force-up;
[edit interfaces interface-name ether-options 802.3ad lacp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Set the state of the interface as UP when the peer has limited LACP capability.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 919
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 909
Understanding Aggregated Ethernet Interfaces and LACP on page 867
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
Chapter 55: Configuration Statements for Interfaces
961