Show Processes Ipc Flow-Control - Dell Z9500 Reference Manual

0
---------- More ----------

show processes ipc flow-control

Display Single Window Protocol Queue (SWPQ) statistics.
Z9500
Syntax
show processes ipc flow-control [cp | rp | linecard {slot-id |
all}]
Parameters
cp
rp
linecard slot-id
Defaults Display SWPQ statistics on all Z9500 CPUs (Control Processor, Route Processor,
and line cards).
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
150
129024
Enter the keyword cp to view SWPQ statistics for the Control
Processor CPU.
Enter the keyword rp to view SWPQ statistics for the Route
Processor CPU.
Enter the slot ID of the line card for which you want to view
SWPQ statistics. The range of Z9500 slot IDs is from 0 to 2.
Enter linecard all to view SWPQ statistics for all line
cards.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
1 0 0
Control and Monitoring