Show Memory Cpu - Dell N1100-ON Reference Manual

thresholds for buffering on the port are reached. A conscientious network
operator might want to examine why the devices attached to Gi1/0/5 and
Gi1/0/6 are sending so much traffic to Gi1/0/2 attached devices and either re-
distribute the devices, rate-limit traffic egressing the devices attached to
Gi1/0/5 and Gi1/0/6, or increase the number of links available for the device
attached to Gi1/0/2.
console#show interfaces utilization
Port Load
Interval Speed
--------- -------- ------ ----- ----- ------- -------- -------- ---------
Gi1/0/1 300
Gi1/0/2 300
Gi1/0/3 300
Gi1/0/4 300
Gi1/0/5 300
Gi1/0/6 300
Gi1/0/7 300
Gi1/0/8 300

show memory cpu

Use the show memory cpu command to check the total and available RAM
space on the switch.
Syntax
show memory cpu
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
No specific guidelines.
Oper. Rx Tx
Util Util
10M 1
1G 0 99
1G 0 15
0 0
1G 37
1G 88
0 0
0 0
Rx Tx
PPS PPS
0 296
0 674500
0 112428
0 0
0 249565
1 593560
0 0
0 0
Switch Management Commands
Buffer Drop
Size Count
0 0
938098 1102
7
1 0
1 0
3 0
0 0
1 0
0
0
0
1
0
0
0
2200