Show System Virtual-Memory - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show system virtual-memory

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
266
show system virtual-memory
show system virtual-memory
<all-members>
<local>
<member member-id>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the usage of Junos OS kernel memory listed first by size of allocation and then
by type of usage. Use
show system virtual-memory
(see "Requesting Technical Support" on page lxxi).
none —Display kernel dynamic memory usage information.
all-members —(J-EX4200 switches only) (Optional) Display kernel dynamic memory
usage information for all members of the Virtual Chassis configuration.
local —(J-EX4200 switches only) (Optional) Display kernel dynamic memory usage
information for the local Virtual Chassis member.
member member-id —(J-EX4200 switches only) (Optional) Display kernel dynamic memory
usage information for the specified member of the Virtual Chassis configuration.
Replace with a value from 0 through 9.
member-id
NOTE: The show system virtual-memory
option displays XML output for the command in the parent tags:
<vmstat-memstat-malloc>
<vmstat-intr> , and
separate XML tag.
view
show system virtual-memory on page 268
show system virtual-memory | display xml on page 272
Table 41 on page 267 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
for troubleshooting with Dell Support
command with the
,
<vmstat-memstat-zone>
<vmstat-kernel-state> with each child element as a
show system virtual-memory
| display XML pipe
, ,
<vmstat-sumstat>
command.