Motion Sensor - Toshiba E-STUDIO 2020ac Information

1.Information About Equipment
 Adjusting the angle of the control panel
You can adjust the angle of the control panel between 7 and 90 degrees from the horizontal position.
Be careful not to catch your hands in the gap between the equipment and the control panel.
This could cause an injury.
 Motion Sensor
A motion sensor is equipped on the left front side of the equipment for the following models.
 e-STUDIO5525AC/6525AC
This equipment recovers from the sleep mode when a person is approaching, and thus can be used straightaway.
The sensing range is 3 levels: close, normal and far.
14 Description of Components