Platen Sheet - Toshiba e-STUDIO 5540C Service Manual

6.12.9

Platen Sheet

If a shadow-like dark area appears on the edge of the image, reset the platen sheet
(1) Open the RADF and remove the platen
sheet.
(2) Place the platen sheet on the original glass
and align it to the top left corner. Close the
RADF gently and open it to check if the
platen sheet is attached properly.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig.6-125
Fig.6-126
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
6 - 129
SETTING ADJUSTMENT
6