Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Syslog.fm
Parameters
level—Specifies the severity level of logged messages displayed on the
console. The possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational and debugging.
Default Configuration
The default severity level is informational.
Command Mode
Global Configuration mode
Example
The following example limits logging messages displayed on the console to
messages with severity level errors.
Console(config)#
logging console errors
logging buffered
Use the logging buffered Global Configuration mode command to limit the
syslog message display from an internal buffer to messages with a specific
severity leve, and to define the buffer sizel. Use the no form of this command
to cancel using the buffer and returning the buffer size to defult
Syntax
buffer-size
level
logging buffered [
] [severity-
]
no logging buffered
Parameters
buffer-size
—Specifies the maximum number of messages stored in the
history table. (Range: 20–400)
level
severity-
—Specifies the severity level of messages logged in the buffer.
The possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational and debugging.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
268
Syslog Commands
Advertisement
Table of Contents
