Show Ip Multicast Neighbor - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ip multicast neighbor

Displays the IGMP neighbor table entries of IP Multicast Switching and Routing.
show ip multicast neighbor
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ip multicast neighbor
Total 2 Neighbors
Host Address
---------------+-----+-----+-------+------+-----
1.0.0.2
0.0.0.0
Output fields are described here:
output definitions
Host Address
VLAN
Port
Static
Count
Life
Release History
Release 6.6.1; command was introduced.
Related Commands
ip multicast static-neighbor
page 41-78
VLAN Port Static
1 2/1 no
1 2/13 yes
The IP address of the IP multicast neighbor.
The VLAN associated with the IP multicast neighbor.
The slot and port number of the IP multicast neighbor.
Whether it is a static IP multicast neighbor or not.
Displays the count of IP multicast neighbor.
The life time of the IP multicast neighbor.
Creates a static IGMP neighbor entry on a specified port on a specified
VLAN.
Count Life
1 86
0 0
OmniSwitch 6250 CLI Reference Guide
IP Multicast Switching Commands
November 2009