Peer-Public-Key End; Protocol Inbound - H3C s3100 series Command Manual

peer-public-key end

Syntax
peer-public-key end
View
Public key view
Parameters
None
Description
Use the peer-public-key end command to return from public key view to system view.
Related commands: rsa peer-public-key, public-key-code begin, public-key peer.
Examples
# Exit public key view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rsa peer-public-key Switch003
RSA public key view: return to System View with "peer-public-key end".
[Sysname-rsa-public-key] peer-public-key end
[Sysname]

protocol inbound

Syntax
protocol inbound { all | ssh | telnet }
View
VTY user interface view
Parameters
all: Supports both Telnet and SSH.
ssh: Supports only SSH.
telnet: Supports only Telnet.
Description
Use the protocol inbound command to configure specific user interface(s) to support specified
protocol(s). The configuration will take effect at next user login.
By default, both SSH and Telnet are supported.
1-9