Show Ipv6 Neighbors - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IPv6 Commands

show ipv6 neighbors

Displays IPv6 Neighbor Table.
show ipv6 neighbors [ipv6_prefix/prefix_length | if_name | hw hardware_address | static]
Syntax Definitions
ipv6_prefix/prefix_length
if_name
hardware_address
static
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you do not specify an option (e.g., if_name), all IPv6 neighbors are displayed.
Examples
-> show ipv6 neighbors
Total 2 neighbors
IPv6 Address
------------------+-----------------+------------+-----------+-------+-------------
2001:db8:39::11
fe80::83f:1eff:feac:7b38 0a:3f:1e:ac:7b:38 Confirmed 8m 21s
output definitions
IPv6 Address
Hardware Address
Reachability
Lifetime
Port
Interface
OmniSwitch CLI Reference Guide
IPv6 prefix. Restricts the display to those neighbors starting with the
specified prefix.
Interface name. Restricts the display to those neighbors reached through
the specified interface.
MAC address. Restricts the display to the specified MAC address.
Restricts display to statically configured neighbors.
Hardware Address
0a:3f:1e:ac:7b:38 Unconfirmed 39s
The neighbor's IPv6 address.
The MAC address corresponding to the IPv6 address.
The neighbor's reachability:
• Incomplete
• Confirmed
• Unconfirmed
Tthe time the entry will remain in its current state.
The port used to reach the neighbor.
The neighbor's interface name (e.g., vlan_1)
March 2011
Reachability Lifetime
show ipv6 neighbors
Port Interface
1/ 1 vlan-41
1/ 1 vlan-41
page 11-37