IPv6 Commands
clear ipv6 neighbors
Removes all entries, except static entries, from IPv6 Neighbor Table.
clear ipv6 neighbors
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This commands only clears dynamic entries. If static entries have been added to the table, they must be
removed using the no form of the
Examples
-> clear ipv6 neighbors
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 neighbor
show ipv6 neighbors
MIB Objects
alaIPv6NeighborTable
alaIPv6ClearNeighbors
OmniSwitch CLI Reference Guide
ipv6 neighbor
command.
Configures a static entry in IPv6 Neighbor Table.
Displays IPv6 Neighbor Table.
March 2011
clear ipv6 neighbors
page 11-39