Mpls Rsvp Authentication Key - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

mpls rsvp authentication key

{ ip | mpls } rsvp authentication [ key authkey ]
Syntax
no { ip | mpls } rsvp authentication [ key [ authkey ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns a key to the interface for MD5 authentication between RSVP peers. Assign
Description
the key before you enable authentication on the interface. The no version deletes
the MD5 key.
NOTE: Keys of up to 40 characters are supported for non–Juniper Networks
implementations. However, a key with more than 16 characters will cause an
authenticated link between E Series and M- or T-series routers to be inoperable.
Options
Interface Configuration
Mode
ip Specifies alternative keyword for compatibility with non–E Series
implementations
mpls Specifies JUNOSe MPLS implementation
authkey Key used to create MD5 digest for messages sent from this interface
and to authenticate messages received on this interface; alphanumeric string in
the range 1–40 characters
Chapter 13: M Commands
mpls rsvp authentication key
1385