Complete Software Guide for Junos
Table 198: Summary of GVRP Output Fields
Field
Global GVRP Configuration
GVRP Status
GVRP Timers
GVRP Interface Details
Interface Name
Protocol Status
Related
Documentation
Verifying That MVRP Is Working Correctly
Purpose
Action
1404
®
OS for EX Series Ethernet Switches, Release 10.3
Value
Displays whether GVRP is enabled or disabled.
Join—The number of milliseconds the interfaces must wait before sending VLAN
advertisements.
Leave—The number of milliseconds an interface must wait after receiving a Leave message
to remove the interface from the VLAN specified in the message.
Leave All—The interval in milliseconds at which Leave All messages are sent on interfaces.
Leave All messages maintain current GVRP VLAN membership information in the network.
The interface on which GVRP is configured.
Displays whether GVRP is enabled or disabled on the interface.
Configuring GVRP (J-Web Procedure) on page 1386
Example: Configure Automatic VLAN Administration Using GVRP on page 1329
After configuring your EX Series switch to participate in MVRP, verify that the configuration
is properly set and that MVRP messages are being sent and received on your switch.
Confirm that MVRP is enabled on your switch.
1.
user@switch> show mvrp
Global MVRP configuration
MVRP status
MVRP dynamic vlan creation: Enabled
MVRP Timers (ms):
Interface
--------------
all
xe-0/1/1.0
Interface based configuration:
Interface
--------------
all
Disabled
xe-0/1/1.0
Confirm that MVRP messages are being sent and received on your switch.
2.
user@switch> show mvrp statistics interface xe-0/1/1.0
MVRP statistics
MRPDU received
: Enabled
Join
Leave
LeaveAll
----
-----
--------
200
600
10000
200
600
10000
Status
Registration
--------
------------
Fixed
Enabled
Enabled
Normal
: 3342
Copyright © 2010, Juniper Networks, Inc.
Dynamic VLAN Creation
---------------------
Enabled